The insulation material involved in the safety sliding

Multipole tube type temperature contact line in mechanical engineering life, often used, but many friends will only use, but do not know much, will be a simple introduction of the composition of the tube type sliding contact line.Tubular sliding contact lines relative to the single sliding contact line, less accessories, form is more simple, tubular sliding contact line as part of the sliding contact line type, understand the tubular sliding contact line, for driving the exercise of process control, is also a very important part of, it can let us correct use and maintenance of the tubular sliding contact line, prolong the service life of them, save the cost of production.

Lift hanger: it is used to fix the position of the tubular sliding contact line. One end of the lift hanger is connected with the Angle steel bracket and the other end is connected with the tubular sliding contact line.Tube sliding contact line: the main accessories are collector, bolt, joint sheath, lifting rack, end sheath, Angle bracket, shifting fork, signal indicator lamp and other accessories.End guard: it is the end connecting each slide line to maintain the insulation of the trickle line and improve the safety performance.Connector sheath: it is used to connect the sliding wire of each section. In general, there is one four-meter multi-pole sliding wire. In this way, each piece is connected by the joint sheath.

Lift hanger: it is used to fix the position of the tubular sliding contact line. One end of the lift hanger is connected with the Angle steel bracket and the other end is connected with the tubular sliding contact line.

Tube sliding contact line: the main accessories are collector, bolt, joint sheath, lifting rack, end sheath, Angle bracket, shifting fork, signal indicator lamp and other accessories.

End guard: it is the end connecting each slide wire to maintain the insulation of the slide wire and improve the safety performance.

Connector sheath: it is used to connect the sliding wire of each section. In general, there is one four-meter multi-pole sliding wire. In this way, each piece is connected by the joint sheath.

Fork: may be a lot of people are not very familiar with the fork, in fact, the sliding contact line fork used to fix the collector, fork a section of the stuck only electrical appliances, a section of the connection, a bit similar to the single-pole collector bracket.

There are two main categories of insulation materials related to the safety of the sliding contact wire, respectively solid insulation materials and liquid insulation materials, among which the most commonly used is solid insulation materials, including insulation sleeve, insulation layer, rubber material, plastic, glass and so on. Because the insulation material has a great influence on the safety of the use of the sliding contact wire, it must be carefully selected in order to allow users to enjoy good quality at the same time can also have a preferential price, the safety of the sliding contact wire manufacturers often use special plastic materials to play the role of insulation, to ensure that the sliding contact wire can be safe and stable use.